20kg Digital Servo Full Metal Gear High Torque, Aluminium Case For Robot Diy (control Angle 180)

Specifications: Weight: 65g(2.32oz) Dimension: 40*20*40.5mm(1.57*0.78*1.59inch) Speed: 0.16sec/60°(7.4v) Torque: 20 Kg·cm (277.6 Oz·in) @6.6v Working Voltage: 6-7.4v Min Working Current: 1a(our Servo Needs A Larger Current Than Other Servo) No-load Current: 100ma # Spline: 25t(6mm In Diameter) The Servo Wire: 30cm(11.8inch) In Length Control Specifications: Control Method: Pwm Pulse Width: 500~2500 Duty Ratio: 0.5ms~2.5ms Pulse Period: 20ms Please Make Sure That The Duty Cycle Of The Controller You Are Using Conform To Our Specifications, Otherwise The Servo Can’t Turn Up To Claimed Degree Wire Layout: Red Wire: + Black Wire: Gnd White Wire: Pwm/signal Package Contents: 1 X Digital Servo 1 X Servo Horn Kit(as Shown In The Figure) If You Have Any Questions, Please Feel Free To Contact Us, We Will Help You As Soon As Possible Note: Please Be Sure To Avoid Locked-rotor When Using Servo, Locked-rotor Means That Artificially Or Machine Obstructs The Servo To Rotate Normally, The Locked-rotor Will Lead To Internal Current Increased To More Than 7 Times And The Temperature Increases, Servo Will Burn Out. Important: 1. Connect Gnd Is Necessary. 2. It’s Recommended That Use Lithium Polymer Battery With High Rate Discharge(min 5c), Please Don’t Use Dry Battery. 3. Please Use A Short And Thick Power Cord, Don’t Use Dupont Cord 4. Not Compatible For Redcat Thunder Drift Rc Car, Not Compatible For 1/16 Scale Car.